Y-Sonic 10

The Y-Sonic 10 Antifouling device prevents the adhesion of algae and mussels in the range of max. 10m ship length. Already infested ship hulls are also freed from algae and mussels in the long term.

Y-Sonic 10 Antifouling Algae Remover for ships up to 10m LWL
Antifouling Y-sonic-10
Position of the click generator for a motorboat, sailing yacht up to 10m LWL

The installation can be done by yourself or by your shipyard.

Is an antifouling on the ship, yacht, boat necessary?

We always recommend the combination of Antifouling with our click system. Nevertheless, we have very good References without antifouling, only with our click system, where only the hull is kept free by high-precision clicks. The decisive factor is the concentration of nutrients in the water. But there are too experience where, e.g. with a high algae concentration or a high worse quality of the gelcoat, hard lacquer the click tones are not enough alone, just like the antifouling. The combination Antifouling with the click system always works better than any system single.

Annual antifouling paints are no longer necessary, the ship’s hull glides better through the water thanks to the lower resistance. The biofilm still remains light but without algae or mussels. The yacht, boat, The hull of the ship is thus protected against algae infestation.

Due to the very low energy consumption of effectively 15 watts is the operation with battery-backed solar collectors possible. For the control the Solar Charger is in charge.

The Y-Sonic 10 has a preventive and curative effect on boats/vessels with fiberglas GRP, plastic, carbon, steel and aluminium hulls. The Y-Sonic 20 is for ships, yachts and motorboats over 10m length and up to 20m length.

Technical Specifications

  • Standard power supply: AC 220 V – 50 Hz, 110 V / 130 V – 50 / 60 Hz or 24 V DC
  • Power consumption 15 Watt
  • Click generator Signal cable length 5m
  • Electronics box Dimensions LxWxH 130x130x60mm
  • Weight 2.3kg
  • EU quality product
  • Service life up to 10 years

Warranty & Guarantee

Conditions for all warranty claims are listed in the General Terms and Conditions, as well as the proper and professional installation of the devices according to the installation instructions delivered with your device.

  • 2 years warranty and guarantee

Delivery Worldwide

Order online and we’ll ship to over 150 countries worldwide. You will find an overview of the prices and shipping time in the shopping cart.

Pond Vacuum Cleaner – Pond Cleaner

The algae-free pond vacuum cleaner is a professional pond and sludge vacuum cleaner for pond cleaning and offers a high suction power to vacuum sediments from 2.5 m depth. A net bag ensures that coarser particles such as leaves and stones are collected. After the use of Algae-free natural algae control, it is necessary to clean the pond in order to remove the dead algae, which still carry nutrients, from the water. The necessary professional accessories, such as telescopic rod extendable, 2-part (1.8-3.6m), round suction nozzle is included in the complete package.

Algae-free pond vacuum cleaner, pond sludge vacuum cleaner with 8m3 / hour output
Algae-free pond vacuum cleaner, pond sludge vacuum cleaner with 8m3 / hour output
1200 Watt suction turbine with sponge filter
Tank with net bag and dirty water pump
Tank with net bag and 800 Watt strong dirty water pump

Technical Specifications

  • 8000 l/h Extraction capacity
  • Waste water pump 13 m3/h
  • 10 m suction hose Ø38 mm & 10 m drain hose Ø38 mm with C-coupling
  • 1200 Watt suction turbine & 800 Watt waste water pump
  • Suction power of 240 mbar negative pressure
  • Power consumption 2000 Watt / hour (9 A / hour)
  • 10 m power cable with EU device plug (mains adapter Switzerland optional)
  • Weight: 35 kg (2 packages total)

With a water suction capacity of 8000 litres per hour, the algae-free pond vacuum cleaner is particularly efficient. Deposits such as sludge, algae, leaves and other sediments can be easily extracted up to 2.5m water depth and optionally recycled.

The pump of dirty water inside the tank ensures a continuous work without interruption with a strong suction capacity of 13m3 / hour, to filter it back or to drain it in the garden bed, under bushes for a natural plant fertilization.

Professional pond cleaning with the algae-free sludge vacuum cleaner 8m3 per hour performance
(in the picture with optional telescopic rod extra long and triangular floor suction brush)

A net bag (38 x 38 cm roundish) in the tank of the sludge vacuum cleaner ensures that pond creatures (monkeys, small frogs), thread algae and coarser parts, such as leaves, stones are collected.

The algae-free pond cleaner makes pond cleaning easy, the sludge vacuum cleaner is suitable for biotopes, biopools, ponds and swimming ponds up to 200m3, more information in the pond sludge suction cleaner comparison.

The Pond vacuum cleaner guide provides an overview of which mud mugs are suitable for which pond size, layer of mud, etc. The capacity plays a role depending on the contamination in order to free it from dirt as efficiently as possible.

Pond Vacuum Accessories

A wide range of other accessories, such as algae and sediment fine filters for water recirculation, suction bells, floor cleaners, triangular floor brushes, thread algae fine filters, depth nets and pre-separators which collect the material (stones, leaves, thread algae) first, are available as accessories in the range under Products.

Warranty, Guarantee

Conditions for all warranty claims are listed in the General Terms and Conditions, as well as the proper and professional installation of the devices according to the installation instructions.

  • 2 years manufacturer warranty and guarantee

More information

Delivery Worldwide

Order online and we’ll ship your Pond cleaner to over 150 countries worldwide. You will find an overview of the prices and shipping time in the shopping cart.

G-Sonic 50 S

The natural G-Sonic 50 S algae control device is specially designed for large swimming ponds, natural pools, swimming biotopes, small lakes, fish ponds and water reservoirs due to its effective click sound range of up to max. 50 metres. Only 24 Volt signals are sent to the click generator, in compliance with the swimming pond standard VDE 702-100.

G-Sonic-50 S für large ponds
G-Sonic-50 S for large ponds
Click Generator Mounting
Click generator mounting clamp

The G-Sonic 50 S algae killer is absolutely maintenance-free and effectively prevents algae growth, thus ensuring clear water. Already existing floating algae die within a few days, green algae within 3 to 4 weeks, thread algae after approx. 7 weeks.

The G-Sonic 50 S algae remover also causes the biofilm (algae mucus layer) on the walls to be broken down by up to 2/3 and thus effectively prevents pathogens (pathogens) from multiplying.

When swimming, at most an interval-like clicking sound can be heard, as the human ear can hear through the skin.

With a short-time timer you can simply turn it off while swimming. Due to the very low energy consumption of max. 40 watts, operation with battery-buffered solar collectors is possible.

Technical Specifications

  • Compliance with the swimming pond standard VDE 702-100 (24 Volt signals to the click generator)
  • Power consumption 40 Watt
  • Voltage electronic control 24VDC / 88-264VAC, 47-63Hz (1m cable with connector)
  • Click generator Signal cable length 15m
  • Click generator mounting
  • Electronics box Dimensions LxWxH 130x130x60mm
  • Click generator dimensions Lxdiameter 150x63mm
  • Sound range 50 metres, lateral 25 metres each
  • Weight 3.5kg
  • Life span up to 10 years
  • EU quality product with 2 years warranty

Warranty & Guarantee

Conditions for all warranty claims are listed in the General Terms and Conditions, as well as the proper and professional installation of the devices according to the installation instructions delivered with your device.

  • 2 years warranty and guarantee

Delivery Worldwide

Order online and we will deliver your G-Sonic worldwide in more than 150 countries to you. Find an overview of prices and shipping time you in the shopping cart.

Service & Support

You would like expert personal advice, information on products or orders – we are happy to help you.

FAQ – Frequently Asked Questions – Welcome to Algen-free Knowledge Base

Our technical customer service answers the most frequently asked questions. In many cases you will not only receive a quick and easy answer to your specific question, but also further interesting information about your product. >>

Need more help?

Get in touch with us here. We will get back to you as soon as possible.

Sludge Bag

The fine filter sludge bag is for water recirculation and filters particles as small as 100 microns. The particles accumulated in the filter bag swell until it is completely filled. The purified water continuously swells out of the filter bag and flows back into the pond. The dimensions are fully extended approx. 160cm x 50cm.

Algae-free fine filter bag
Algae-free fine filter bag
Fine filter bag 100micron
Fine filter bag 100micron

Fine filter bags allow pond vacuuming without the need for a water loss. With this useful solution you can use pond water and return it to the pond after cleaning. The The fine filter bag is attached to the drain hose of the pond vacuum cleaner as usual. connected. With the supplied fixation strap you can fix the the drain hose in place.

For the fine filtration the fine filter bag is very suitable to return the valuable water. The danger of nutrient-rich refill water is averted by the water recirculation, so that no new nutrients (phosphates, nitrates, etc.) are filled into the pond, otherwise algae growth takes place again.

Included in delivery:

  • Fine filter bag approx. 160cm x 50cm
  • Hose anchor for 32mm, 38mm, 40mm, 50mm hoses
  • Velcro tape for fastening
  • Detailed instructions

First a pond basic cleaning is recommendable, since otherwise the bag can clog too fast. The fine filter bag is suitable for water filtration in order to return the valuable water.

If there is slight soiling, the fine filter bag can also be used directly.

After a quick basic cleaning and the discharge of dirty water, work should begin with the fine filter bag. In this way, the water throughput remains high. As a rule, permeability decreases during pond suction. In return, the filter fineness increases. This means that the water that is fed back into the pond has a certain turbidity. This turbidity disappears after 1-2 days and settles as fine precipitation in the pond.

Note: It still makes sense to first create a and the heavily soiled water is to be cleaned and the to be derived. In the aftermath, the fine filter bag can then be used to the water loss remains the same with this procedure. low overall, with only slight pond contamination the Fine filter bag can also be used directly.

Delivery Worldwide

Order online and we will ship your product to you in over 150 countries worldwide. You will find an overview of the prices and shipping time in the shopping cart.

Pre-Separator Tank

The pre-separator suitable for the algae-free pond sludge vacuum cleaner 8m3 separates stones, heavy leaves, newts, fish and frogs during pond cleaning. Depending on the pond bottom, you select the appropriate nozzles or brushes for extracting the sediments and are inter-coupled to the sludge suction unit on the suction side.

Pre-separator with connecting hose Ã38mm / 1 x C-coupling and filter mat
Pre-separator with connecting hose Ø38mm / 1 x C-coupling and filter mat
Pre-separator with connecting hose Ã38mm / 1 x C-coupling and filter mat
Pre-separator with connecting hose Ø38mm / 1 x C-coupling and filter mat

How does a pre-separator work?

The pre-separator collects this material, so it does not pass through the pond vacuum cleaner. The animals and possibly also stones can be removed again and returned to the pond. The separation works by gravity which means that suspended particles dissolved in the water are completely passed through while heavier particles remain in the pre-separator buoy.

The pre-separator is supplied with a sponge plate, which can optionally be used in some suction applications. This can be very helpful e.g. in autumn with freshly fallen leaves around the water then coarsely filtered back into the pond. In principle, however, the pre-separator is not suitable for filtering and is used without the sponge insert. If you really want to return the cleaned pond water to the pond, you need a separate filtering instrument.

Technical Specifications

  • Pre-separator with plug-in and C-coupling
  • Connecting hose
  • Strong filter mat
  • Total weight: approx. 15 kg

Delivery Worldwide

Order online and we’ll ship to over 150 countries worldwide. You will find an overview of the prices and shipping time in the shopping cart.

Water Test Strip 6in1 (50)

Test strip for 1 minute quick test of fresh water. The test strips measure the 6 important water values and serve as a quick orientation test for aquarium, pond, well, spring and tap water.

Water test strip 6in1 (50)
JBL Water test strip 6in1 (50)
Water test strip 6in1 (50)
50 pieces 6 in 1 test strip

JBL EasyTest 6in1 Water Test Test Strips

Simply determines the water quality in seconds. Super fast, immerse and the six water values / results are readable within 1 minute:

  • Chlorine (CI2) 0 – 3.0 mg/l
  • pH value (PH) 6.4 – 9.0
  • Carbon hardness (KH) 0 – 20 °dKH
  • Total hardness (GH) 21 °dGH
  • Nitrite (NO2) 0 – 10 mg/l
  • Nitrate (NO3) 0 – 250 mg/l
  • Package: 50 test strips per package
  • Including instructions and color chart
Values RecommendedEffect
PH value:Acid 6,5-8.5Nutrient for algae
KH valueCarbonate hardness
5-10
Bicarbonate acts as a pH buffer
(calcium, Magn.)
GH valueTotal Hardness 10-12Concentration of calcium & magnesium salt
NO2 valueNitrite 0 mg / lNutrient for Baktieren
NO3-valueNitrate 0 mg / lNutrient for algae
CI valueChlorineGift for plants, fish

Worldwide delivery

Order online and we will ship your product to you in over 150 countries worldwide. You will find an overview of the prices and shipping time in the shopping cart.

More Information